| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Exterior | Section: Lighting (ext) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002X0L009X |
| Title: LIGHTING (INT): LIGHTING SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Illuminated Entry
|
Display |
Default |
Content |
Setting |
|---|---|---|---|
|
Lighting Time |
15s |
Changes illumination duration after door closure (It will quickly fade out when turning ignition switch ON) |
7.5s/15s/30s |
|
I/L when ACC OFF |
ON |
Illuminates light when ignition switch turned to ACC (Room light illuminated when interior light switch set to DOOR) |
ON/OFF |
|
I/L ON W/Door Key Unlock |
ON |
Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR) |
ON/OFF |
Light Control
|
Display |
Default |
Content |
Setting |
|---|---|---|---|
|
Disp Ex ON Sen |
NORMAL |
Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light*2 |
Light2/Light1/Normal/Dark1/Dark2 |
|
Disp Ex OFF Sen |
NORMAL |
Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light*3 |
Light2/Light1/Normal/Dark1/Dark2 |
|
Sensitivity |
NORMAL |
Function to adjust sensitivity of lighting illumination*1 |
Light2/Light1/Normal/Dark1/Dark2 |
HINT:
*1: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*1
|
Lighting brightness |
|
||||
|
Setting |
Dark2 |
Dark1 |
Normal |
Light1 |
Light2 |
*2
|
Brightness when lowering the lights |
|
||||
|
Setting |
Dark2 |
Dark1 |
Normal |
Light1 |
Light2 |
*2
|
Brightness when canceling the lowering of the lights |
|
||||
|
Setting |
Dark2 |
Dark1 |
Normal |
Light1 |
Light2 |
|
|